Heavy-Wear Crew Shirts for Crews That Trash Polos in a Week.
Heavyweight tees that survive cement splash. Hi-vis that meets ANSI 107 for night pours. Foreman polos that hold up for client walk-throughs. We outfit Vegas concrete and masonry shops from 5-person crews to 50-person commercial flatwork operations.
Las Vegas concrete and masonry crews wear heavyweight 6.5–7 oz cotton tees (Carhartt K87, Bayside 5100) with Carhartt B324 double-knee carpenter pants to survive cement abrasion and 145°+ asphalt heat. ANSI 107 Class 2 hi-vis is required for night pours and street-adjacent work; foreman polos in differentiated colorways for client walk-throughs.
Concrete is the most punishing trade for apparel. We pick gear that survives.
Most workwear catalogs spec their lifespan against light service work. Concrete and masonry crews destroy that gear in a third of the expected wear cycle. We stock the heavier-weight options that actually last.
Built to take the abuse, not just look the part
A concrete finisher trashes a Port Authority polo in a week. We swap in heavyweight cotton-poly blends, double-needle stitching, and Carhartt-grade tees that survive a full season instead of a month.
Fabrics that don't stain to the seam on the first pour
Cement burns through cotton over time and exposes crews to OSHA respirable silica hazards. Poly-blend shirts release wet concrete cleaner in the wash and don't go stiff after exposure. We pick fabrics that survive the splash zone.
Hi-vis that meets the spec for street and night pours
Class 2 vests, t-shirts, and long-sleeve hi-vis per ANSI/ISEA 107 for night pours, street work, and DOT-adjacent jobs. We follow the 72-square-inch logo limit so branding doesn't break the cert.
What we make for concrete and masonry crews.
Field-tested combinations from major industry trade shows attendees and the Vegas commercial pour scene. The fabrics here are picked because they survived the trade, not because they looked good on a sales sheet.
Heavyweight branded tees
Carhartt K87 or Gildan 2000 · 6.1oz cotton or poly-blend · screen-printed back
Hi-vis Class 2 shirts
Lime or orange · ANSI 107 · poly mesh for breathability
Foreman + supervisor polos
Differentiated colorway · embroidered chest · for client walk-throughs
Branded crew hoodies
Heavyweight · for early-morning pours + winter mornings
Crew configurations we run for concrete and masonry shops.
Most operations skip polos for the field crew (they don't survive) and put them on foremen and estimators instead. Field crews run on heavyweight tees + hi-vis when the job calls for it.
- 01 Flatwork and finisher crews in heavyweight tees that survive cement splash
- 02 Night-pour crews in branded hi-vis with reflective striping (street and DOT-adjacent)
- 03 Foreman differentiation by color and polo vs tee — visibility from across the slab
- 04 Masonry crews running consistent crew tees for residential blockwork and commercial veneer
- 05 Pump operators and tailgate finishers in branded hi-vis with company name on the back
- 06 New-hire kits with 5 tees, hat, hi-vis vest — built around the gear that'll actually survive
Branded workwear for Las Vegas concrete and masonry crews — built to survive abrasion, alkali, and 145° asphalt.
Concrete and masonry work is the harshest environment in Vegas construction outside of FR-rated electrical. The combination of alkaline cement exposure, abrasive aggregate, 145° asphalt and concrete surface temperatures in summer, and constant kneeling and lifting punishes garments in ways most catalog workwear isn't built for. Bighorn Threads supplies concrete contractors, masonry crews, foundation specialists, and decorative concrete teams across Las Vegas with apparel that holds up to the work — heavyweight cotton tees, double-knee pants, and heavy-duty hoodies from Carhartt, Bayside, and Dickies.
The right field-crew tee for concrete work is a heavyweight 6.5–7 oz cotton (Carhartt K87, Bayside 5100, or Hanes Beefy-T) with reinforced double-needle stitching at the seams. Performance polyester blends, while popular for general construction, don't hold up as well against cement abrasion — the synthetic fibers wear thin at high-friction points faster than ringspun cotton. We screen-print or embroider the company logo on the left chest with high-density inks that resist concrete splash and 200+ industrial wash cycles.
Pants are where concrete crews spend most of the durability budget. Double-knee pants — Carhartt B11 Loose Fit, Carhartt B324 Carpenter, Dickies Industrial Double Knee — have reinforced fabric panels at the knees that survive long pours, finishing work, and form-stripping. The reinforcement panel is critical; standard work pants blow out at the knees within 6 months on a concrete crew. We hem to spec on bulk orders and decorate optional logos on the back pocket or thigh for fleet-vehicle visibility.
For Vegas summer, the heat conversation is real. Concrete crews work outdoors through July and August on commercial pours that have to start at 5am to beat the slab temperature. Long-sleeve UPF performance shirts are increasingly the spec for sun protection — counterintuitive, but the right lightweight long-sleeve in 4–5 oz performance fabric is cooler in 110° heat than a heavyweight short-sleeve cotton tee because evaporative cooling actually works on the fabric. We carry Carhartt Force Long-Sleeve and Bayside Performance Long-Sleeve in colors crews accept (gray, khaki, light blue) and we'll quote both heavy and performance options on every order.
For larger concrete contractors with 50+ crew, we set up company stores with the SKUs your foremen actually want, sizing on file by employee, and reorder triggers for replacement shirts and pants when wear-out is documented on the jobsite. Branded workwear for concrete crews has higher replacement frequency than other trades — we bake that into the program so the apparel budget is predictable instead of bursty.
Concrete crews working noon shifts in July need workwear engineered for the heat — see our Nevada OSHA heat rules — 2026 workwear guide. For the broader crew-outfitting playbook, our how to outfit a construction crew in Vegas writeup covers the full kit.
Questions concrete and masonry shops ask us.
Why do my polos last a week on concrete crews?
Two reasons: lightweight cotton can't survive abrasion against concrete, rebar, and forms — and the cement burns the fabric over time. Switch to heavyweight cotton-poly blends (6.1oz+), or skip polos entirely for the field crew and put them on the foremen instead.
What's the best brand for crews that destroy everything?
Carhartt K87 (Workwear Pocket Tee) is the workhorse — heavyweight, double-stitched, holds up. Gildan 2000 ultra-cotton is the budget option for high-rotation crews. For hi-vis, ML Kishigo and Pioneer survive the abuse where cheaper imports don't.
Can you handle hi-vis branding for night pours and DOT-adjacent work?
Yes. ANSI Class 2 in lime or orange, with reflective striping intact. We follow the 72-square-inch logo limit so the cert stays valid. Standard placement: company on back yoke, name or logo on left chest.
How do you handle reorders when shirts get destroyed mid-season?
We keep the spec, art files, and stock on hand. Reorders for active accounts ship fast. For shops where attrition runs heavy, a company store with monthly allowances per crew member solves the budget conversation.
Do you stock heavyweight long-sleeves for masonry crews working in cooler months?
Yes — Carhartt long-sleeve tees and quarter-zips, plus heavyweight branded hoodies for January desert mornings (it's 38° at 6 AM in Pahrump in winter, contrary to what people think about Vegas).
Can a foreman or office manager order direct without going through ownership?
Yes — that's exactly what company stores are for. Set per-user budgets, approval rules, and PO tagging. Foreman orders, you approve, we ship. Read more on company stores.
Stop replacing shirts every month. Start with gear that lasts.
Send your logo. Stocked heavyweight tees and hi-vis on hand.